TWISP AERO 2 AIO STARTERPACK - GREY A classic, redefined.

Designed for a refined Classic (MTL) vaping experience, the Twisp Aero 2 combines the best elements from its predecessor – the Aero X – with enhanced flavour delivery, refined control and intuitive design for the ultimate flavour experience.

R999.95

Delivered in 1-3 working days

Free delivery on orders over R399

The Twisp Aero 2 puts the control in your hands, thanks to an easily-adjustable airflow control that lets you customise your vaping experience. The 0.8 ohm mesh atomiser head and variable power selection deliver a smooth draw that feels natural and controlled.

Crafted with considerable attention to detail, the Twisp Aero 2 sees the return of the fluted mouthpiece, with classic knurling on the airflow control ring and a long-lasting PVD coating on the compact stainless-steel device.

SPECIFICATIONS

Battery
1500 mAh battery
Tank Capacity
2.8ml
System Type
Open

WHAT'S IN THE BOX

Aero 2 device

Mouthpiece

Manual & Charger cable

Atomiser

Aero 2 device

Mouthpiece

Manual & Charger cable

Atomiser

PERFORMANCE

PRACTICALITY

1500 mAh battery

with micro USB charging cable

Push-in coil

for easy replacement

Smart button

that enables variable power from 10-20W

2.8ml top fill tank

for easy refilling on the go

Long-lasting mesh coil

that produces more accurate flavour

Durable PVD coated finish

on a stainless steel body

Refined airflow control

for a smooth draw

Fluted mouthpiece

PERFORMANCE

1500 mAh battery

with micro USB charging cable

Smart button

that enables variable power from 10-20W

Long-lasting mesh coil

that produces more accurate flavour

Refined airflow control

for a smooth draw

PRACTICALITY

Push-in coil
for easy replacement

2.8ml top fill tank

for easy refilling on the go

Durable PVD coated finish
on a stainless steel body

Fluted mouthpiece

TWISP AERO 2 AIO FAQs

HOW DO I CHANGE MY TWISP AERO 2 AIO COIL/ATOMISER HEAD?expand_more
  • Holding the closed tank upside down (mouthpiece pointing downward), unscrew and remove the battery from the tank
  • Simply pull the used atomiser head out from the tank and dispose responsibly
  • It is recommended to prime the new atomiser head by dripping a few drops of flavour into the top of the atomiser head to soak the wick before refilling
  • Simply push the new atomiser head into the tank, return the battery to the tank and screw closed
  • Draw air through the mouthpiece a few times with the airflow wide open before first use to avoid a dry burn
  • Be sure to allow the new atomiser head to soak for at least a couple of minutes before use
  • Please do not use water to clean the atomiser head
HOW DO I PRIME MY TWISP AERO 2 AIO COIL/ATOMISER HEAD?expand_more
Should you experience a ‘burnt taste, this is most likely due to the atomiser head not wicking correctly. Check the following:
  • Be sure to prime new atomiser heads correctly - drip 2-3 drops of liquid on each wick hole of the atomiser head to help soak the cotton wick
  • Refill the tank after every atomiser head change and allow a few minutes for the wick to soak before use
Important to note:
It is recommended to refill your tank after inserting a new coil. It helps with overcoming any airlocks that might prevent liquid reaching the wick and the extra volume helps push through to the atomiser head when closed.
HOW DO I REFILL MY TWISP AERO 2 AIO?expand_more
  • To refill, twist and remove the mouthpiece assembly to expose the refill ports
  • Refill through the curved ports on either side of the central air tube. Fill up beyond the glass, but below the level of these ports. Avoid trying to overfill or flavour will spill over into the air channel
  • Replace the mouthpiece assembly to close and seal the tank as quickly as possible
  • Be sure to allow a new atomiser head to soak for at least a couple of minutes before using
  • Adjust airflow to desired setting by shifting the airflow control levers to the right for maximum airflow, or to the left for minimum airflow
Important to note:
  • Do not leave the top cap section off the tank for too long when filling, flooding of the coil might occur. We recommend you close the airflow before opening the tank and work quickly. Should this happen close the tank as you would normally do and unscrew the tank base. Clean out any excess liquid in the liquid trap of the top of the battery
  • Leaking usually means a compromised seal that lets air into the tank. To prevent possible leaking into the atomiser base and out of the airflow control slots, it is important to ensure that the inner assembly is firmly tightened to properly sandwich the tank glass between the seals and metal components. We recommend checking this before filling, and especially when new and out of the box
  • It is also very important to ensure that all seals are present and correctly fitted
  • Aside from the inner assembly, the atomiser base and tank top cap should not be overtightened. Finger-tight is fine for these parts
HOW MUCH LIQUID DOES THE TWISP AERO 2 AIO TANK HOLD?expand_more

The tank holds a maximum of 2.8 ml.

WHEN DO I REFILL MY TWISP AERO 2 AIO?expand_more

Consider refilling your tank before completely empty. There should always be some liquid covering the wicking holes on the inside of the tank. If you taste a burnt flavour the atomiser may have run dry. The atomiser should be replaced.

WHY IS MY TWISP AERO 2 AIO LEAKING?expand_more

The Twisp Aero 2 atomiser head should always be located and lightly pushed into the tank until a firm seal is created and properly inserted when the tank is closed. Make sure the tank and atomiser base/battery are properly screwed together – finger-tight is perfect. If your tank still leaks out of the vent, please check the following:

  • Do not leave the top cap section off the tank for too long when filling, flooding of the coil head might occur. If this does happen, please ensure you remove the coil, wrap in a tissue and shake out excess eLiquid. Once completed, the coil can be inserted back into your Twisp Aero 2 device
  • Check to make sure the top cap is properly screwed down and that the tank top is sealed. Finger-tight is perfect (do not over-tighten)
  • Check that the top cap seal is correctly seated on the inside of the top cap
  • Check that the tank is correctly assembled and that the glass cylinder is sealed between the top and bottom tank seals
  • Check that the glass cylinder is not damaged or cracked

We recommend that the inner tank assembly is firmly tightened before filling and using for the first time.
Ensure that the inner assembly is firmly tightened to properly sandwich the tank glass between the metal parts, but avoid over-tightening the tank top cap and battery, or they might get jammed. Finger-tight is fine for these parts.

HOW DO I REPLACE MY TWISP AERO 2 AIO GLASS?expand_more

Replacing the glass tank is very easy:
CAUTION: if the glass is broken, take care when removing any shards and take appropriate measures to protect your hands before unscrewing the tank.

  • Unscrew and remove the tank top
  • Unscrew and remove the atomiser base
  • Grip the metal parts on either side of the glass with both hands, unfasten by firmly rotating anticlockwise
  • Pull the metal parts apart to be able to carefully remove the damaged glass cylinder
  • Replace the rubber seals (if required) and glass cylinder
  • Reassemble
HOW DO I CLEAN MY TWISP AERO 2 AIO?expand_more

The Twisp Aero 2 AIO tank is a slightly more complex atomiser than our other tanks, but it can be completely disassembled for cleaning, which makes thorough cleaning much easier. The knurling area of the Aero 2 tank could also trap dirt and grime (depending how you treat your tank).

To clean, use a soft bristle brush to scrub the part. The Twisp cleaning kit bristle brush is a perfect option.
If grime is a little stubborn, you can use a tiny amount of dish washing liquid. Make sure that no water enters the top of the battery or enters the charging ports.

The knurling on the top cap can easily be cleaned after disassembly.

The tank section should be cleaned on a regular basis (recommend every flavour change / coil change) as trapped liquid can accumulate over time. This will show up as a dark band at the base of the glass tank, this is normal, and can easily be avoided by cleaning the tank. Always clean and dry the tank before storing or without using for any length of time.

Full clean:

  • Disassemble the tank into its component pieces and remove from battery. Set battery aside
  • Remove atomiser head and set aside
  • Wash tank components thoroughly with warm water
  • Allow components to dry on a cloth or soft tissue before reassembling
  • Wipe the battery section with an alcohol wipe, do not use water

Important to note: We recommend that the inner tank assembly is firmly tightened before filling and using for the first time. Ensure that the inner assembly is firmly tightened to properly sandwich the tank glass between the metal parts but avoid over tightening the tank top cap and battery, or they might get jammed. Finger-tight is fine for these parts.

HOW DO I ADJUST THE AIRFLOW ON MY TWISP AERO 2 AIO?expand_more
The Twisp Aero 2 is an uncompromising Classic (MTL) device with adjustable airflow by means of a unique, side slide adjustment lever that stops at a minimum and maximum setting for restricted MTL and open MTL draw, respectively. The Twisp Aero 2 is not designed for a Power (STL) experience. Adjust airflow to the desired setting by shifting the airflow control levers to the right for maximum airflow, or to the left for minimum airflow.
Twisp Aero 2 airflow advantages:
Precise adjustment possible
Fine adjustability of airflow possible
Smooth and refined airflow for a great Classic (MTL) experience
HOW DO I ADJUST THE POWER SETTINGS ON MY TWISP AERO 2 AIO?expand_more
The Twisp Aero 2 can be set to 5 different regulated power settings by means of the smart button. The power is kept constant to ensure a consistent performance in vaping experience. The power range for the Twisp Aero 2 ranges from minimum to maximum in 5 steps; and one might find that one setting is better suited to some flavours than the other. It is a matter of taste. The lower settings will pro-long battery life. To set your preferred power level follow the steps below:
  • Press your smart button 3 times in rapid succession
  • The LEDs should now be flashing and displaying the current power level
  • Continue to press your smart button to cycle through the power settings (cycles in a clockwise direction)
  • When your LED is displaying your preferred power level, press and hold the smart button to accept
  • Your selected power mode will stay the same when you power your device on/off
MY TWISP AERO 2 AIO IS NOT HOLDING CHARGE?expand_more

The Twisp Aero 2 AIO should be able to deliver ±550 puffs on a full charge. If this is not enough, check what power setting your Aero 2 AIO is set to, sometimes changing to a lower power setting will still be acceptable and extend your battery life.

HOW DO I USE MY TWISP AERO 2 AIO?expand_more
  • Power On/Off: Click the button 5 times in rapid succession to power the Aero 2 on/off
  • Press and hold the button to activate the atomiser during use
  • Atomiser heads wear out over time and will need replacing when vapour production diminishes
  • For optimal results, please power off your device when not in use, to prevent accidental activation
  • The Aero 2 can be set to 5 different regulated power settings by means of the smart button. The power is kept constant to ensure consistent performance and vaping experience
  • Power level: To set your preferred power level, press the smart button 3x in rapid succession. The LEDs will flash with the current power level setting. Continue to press the button to cycle clockwise though the settings. When the desired power level is reached, press, and hold the button to accept. Your selected power mode is retained between power on and power off states
  • The LED indicator will flash the power setting 5x when powering the Aero 2 AIO on/off
  • Press and hold the button to use as a Classic (MTL) device
  • Classic (MTL) use is as it sounds – vapour is drawn into your mouth first, before inhaling
  • Adjustable airflow: slide the airflow control lever on the battery to the left to decrease, or to the right to increase the airflow
  • A small amount of leaking from the air vents can be normal. Wipe away excess flavour after filling or when present. It is important to not leave your tank open for longer than necessary when refilling. Flavour will wick through, flooding the atomizer head and eventually leaking out of the vents if the tank is left open for too long
  • Be sure to clean the device after opening, wipe the seals dry and any excess Twisp eLiquid that might have accumulated in the mouthpiece, central air tube or on the battery
WHAT DO THE DIFFERENT LED WARNINGS ON THE TWISP AERO 2 AIO MEAN?expand_more
  • Charge level indication takes place around the button after every button press. Five LED lights are used to indicate the level of the charge in 20% increments. A full ring indicates a full battery. As the charge drops the lights go out in an anti-clockwise direction
  • Charging is indicated by the same five LED lights. As the charge increases, so do the number of lights, in a clockwise direction
  • Short circuit protection: In the unlikely event that your atomiser head or battery short circuits, the power will shut off, and the top two LED lights will flash alternately. Please change your atomiser head or contact Vuse Care should the problem persist
  • Overheat protection: If the button is pressed for longer than 10 seconds, the power will shut off to prevent damage to the atomiser head, and the button lights will cycle anti-clockwise for few seconds. The device can continue to be used normally thereafter
  • Low voltage protection: When the battery voltage drops lower than required, a single LED will flash at the 1 o’clock position and the device will power off. Charge the device and power it back on
HOW DO I STORE MY TWISP AERO 2 AIO FOR LONG PERIODS?expand_more
When storing your device, follow the steps below to ensure that your device is stored correctly, and no damage occurs during this period:
  • Empty your tank and clean your device thoroughly
  • It is best to remove the coil when storing the device to avoid any form of leakage
  • Do not store the battery on a full charge or low battery, the correct power level to store would be at 50-70% battery life
  • Ensure to charge the battery up to 50% every 3 months to ensure no damage is caused to your lithium battery

Customer Reviews

0 reviews
Only registered users can write reviews. Please Sign in or create an account
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account

All our agents are currently offline, please leave a message and we'll get back to you.

close