Designed to fit in snugly in your pocket or the palm of your hand, the Twisp Clearo Pod takes vaping on the go to the next level. With more battery life and advanced electronic control, this Clearo vape pen brings a modern touch to a dependable device.

THE
FLAVOUR
CHASE

The pod-style tank features a completely open and re-usable design, allowing atomiser head replacement and refilling. Simply store and swap flavours on the go. The legendary Clearo coil is dedicated to the purest flavour delivery.

YOU’RE IN CONTROL

The Clearo Pod introduces variable control to the Clearo range. Not only can you customise the airflow to match your flavour, but you can also boost the power from the standard 8W to 10W. This means an even more refined vaping experience of different flavours and nicotine strengths to suit your Classic (MTL) vaping style.

ADD TO BASKET

ON THE GO

THE
FLAVOUR
CHASE

YOU’RE IN CONTROL

ADD TO BASKET

This product contains nicotine and is addictive.

ADD A DROP OF eLIQUID

Your day. Your way. Choose from a range of distinctive flavours and nicotine
strengths. Or mix your own blend for a unique burst of inspiration when you
need it most.

ADD A DROP OF eLIQUID

Your day. Your way. Choose from a range of distinctive flavours and nicotine strengths. Or mix your own blend for a unique burst of inspiration when you need it most.

TWISP CLEARO POD SPECIFICATIONS

PERFORMANCE

Practicality

Boost button

allowing you to tailor your output from 8W to 10W

Modern and compact design

that fits in your palm and your pocket

900 mAh

built-in battery that’s compact and powerful

Standard Clearo coil

tailored for the purest delivery with your favourite Classic (MTL) flavour

Replaceable and refillable pod-style tank

for easy flavour changes

Airflow control

to tailor it to your preferred vaping style or flavour

TWISP CLEARO POD SPECIFICATIONS

PERFORMANCE

Boost button

allowing you to tailor your output from 8W to 10W

900 mAh

built-in battery that’s compact and powerful

Replaceable and refillable pod-style tank

for easy flavour changes

Practicality

Modern and compact design

that fits in your palm and your pocket

Standard Clearo coil

tailored for the purest delivery with your favourite Classic (MTL) flavour

Airflow control

to tailor it to your preferred vaping style or flavour

What’s Inside?

1 x Clearo Pod 900 mAh battery
1 x Clearo Pod 2ml tank
1 x Clearo 1.6 ohm atomiser head
1 x micro USB charging cable
1 x user manual

ADD TO BASKET

What’s Inside?

1 x Clearo Pod 900 mAh battery
1 x Clearo Pod 2ml tank
1 x Clearo 1.6 ohm atomiser head
1 x micro USB charging cable
1 x user manual

ADD TO BASKET

TWISP CLEARO POD FAQs

WHAT IS THE DIFFERENCE BETWEEN THE TWISP CLEARO 3 AND TWISP CLEARO POD?

The Clearo Pod is a refillable Pod style device in a more compact form-factor. The Clearo Pod offers adjustable airflow and adjustable power which can be boosted. Compared to the Clearo 3 it features a larger battery and a replaceable, refillable pod for easy flavour changes.

HOW DO I ADJUST THE AIRFLOW ON MY TWISP CLEARO POD?

The Twisp Clearo Pod has an adjustable airflow control ring at the atomiser base of the pod. The benefit of this is to better customise the airflow and tailor it to your preferred vaping style or flavour. It also offers a wider range of airflow for those that prefer a looser draw, or to balance out the extra power on hand.

Adjust the airflow ring on the atomiser base found at the bottom of the pod and test it by both drawing air through before inserting, and then after inserting and activating - until you are satisfied with the perfect Classic (MTL) experience to suit your vaping needs. Once inserted, the pod airflow will remain perfectly tuned until you want to change it up again.

Twisp Clearo Pod airflow advantages:

Wide adjustment possible
Easy adjustment
Set airflow per pod, and per flavour profile for a unique flavour experience
Smooth airflow

HOW DO I REPLACE MY ATOMISER HEAD OR COIL IN MY TWISP CLEARO POD?

The Twisp Clearo Pod’s atomiser head is the same as that of the Twisp Clearo 3. To replace the atomiser head:

Remove the pod from the battery
Make sure the tank is empty. Now turn the tank upside down
Lift the D-ring and unscrew the atomiser base
Unscrew the Twisp Clearo atomiser head from the base and dispose responsibly
It is recommended to prime a new atomiser head by dripping a few drops of flavour into the top of the new atomiser head, to help soak the wick before heading. 3-5 drops should suffice
Replace the atomiser head and re-assemble
Fill up your pod and wait a few minutes to allow for proper wicking before use

Important to note: To prolong atomiser head life, we recommend using only one flavour per atomiser head. It is highly recommended that you have multiple pods so that you can dedicate a flavour to a single pod and atomiser head. The variable airflow can be adjusted per pod, ensuring that you have optimum balance between airflow and flavour.

WHY AM I GETTING A BURNT TASTE WHEN USING MY TWISP CLEARO POD?

Consider refilling your pod before completely empty. There should always be some liquid covering the 4 wicking slots on the inside of the pod. If you taste a burnt flavour it is due to the atomiser head drawing insufficient flavour. the atomiser may have run dry. The atomiser should be replaced.

Atomiser heads do wear out over time. Replace the atomiser head when you taste a dry or burnt flavour. To change the atomiser head:

Remove the pod from the battery
Make sure the tank is empty or low and upside down
Lift the D-Ring and unscrew the atomiser base
Unscrew the Twisp Clearo atomiser head from the base and dispose of responsibly
Prime your new atomiser head by dripping 6-7 drops of liquid onto each feeding hole on the coil (white holes on the side of your coil) and allow it to seep completely inside the coil then move to the next feeding hole in a clockwise direction. Replace the atomiser head and re-assemble
Fill up your pod and wait a few minutes to allow for proper wicking before use

Important to note: It is recommended to refill your pod after inserting a new coil.

HOW DO I REFILL MY TWISP CLEARO POD?

Consider refilling your pod before completely empty. There should always be some liquid covering the 4 wicking slots on the inside of the pod.

Rotate the pod/device so that the silicone flap is facing upwards
Gently lift the silicone tab from the dot side of the flap
Fill the tank through the exposed fill port, do not overfill the pod, as an air lock can form
Replace the seal, ensuring that the seal is fully flush within the filling recess
If the pod was removed from the battery, please re-insert

WHY IS MY TWISP CLEARO POD LEAKING?

Leaking occurs when air can enter the tank. This is usually due to a crack in the tank or a missing or damaged seal. If your tank leaks out of the vent, please check the following:

Make sure the atomiser base seal is present and undamaged
Check that there is an atomiser head in place, and correctly installed
Make sure the pod tank and atomiser base are properly screwed together - finger tight is perfect
Make sure the pod tank is in good condition and there are no cracks
Check to make sure the silicone filling tab is closed correctly

Upon checking and correcting also clear any liquid that might have accumulated in the atomiser base.

HOW DO I CLEAN MY TWISP CLEARO POD?

We recommend cleaning the pod tank and atomiser base on a regular basis (recommend roughly after 10 refills). Always clean and dry the pod tank if you are storing for a lengthy period. To clean:

Disassemble the pod tank into its component pieces
Remove the atomiser head and set aside
Rinse tank components thoroughly with warm water
Clean out any excess liquid that may have collected in the atomiser base by using a soft tissue or cloth
Wipe off any excess liquid from the base of the atomiser head
Reassemble and fill as per filling instructions

Important to note:

Do not expose the battery to any cleaning liquids
Do not use water to clean the atomiser heads/coils

WHAT DO THE DIFFERENT LED LIGHT INDICATORS MEAN ON MY TWISP CLEARO POD?

Charge level indication takes place in the power button (main Indicator light) after every button press. The single LED light is used to indicate the level of the charge in 3 increments. A white indicates a 100-65% full battery. As the charge drops the light changes from white, to blue (65-30% full), and finally red (30-0%)
Charging is indicated by the same main indicator colour LED light, once charging initialises the light will briefly cycle through its 3 colours. As the charge increases, so does the colour index
Boost mode enabled: The boost indicator will light up white when the boost indicator button is pressed and activated. Pressing the same button will disable boost mode and revert the power output to normal, while turning off the indicator light
Connection error (short circuit): In the unlikely event that your atomiser head or battery short circuits, the power will shut off, and the top and bottom LED lights will flash alternately. Please reseat the atomiser head, and or the pod, or contact Vuse Care should the problem persist
Overheat protection: If the button is pressed for longer than 10 seconds, the power will shut off to prevent damage to the atomiser head, and the main indicator LED will cycle through the three colours for a few seconds. The device can continue to be used normally thereafter
Overcharging protection: To protect the battery, the charging power is shut-off when the charge is completed
Low voltage protection: When the battery voltage drops lower than required, the main indicator LED will flash 4 times in red and the device will lock. Charge the device and power it back on